Welcome to E-mold rapid manufacturing Ltd !
linkedin twitter youtube
Tel : (+86)1345 0999 345 Email: louisa@e-moldrapid.com
Blog
Home > Blog
Jun 27 , 2022
Hard-coat with Teflon (MIL-A-63576A)     The main purposes of hard anodizing is to make the aluminum more resistant to corrosion. The PTFE(Polytetrafluoroethylene) coating is typically far thicker and harder than normal anodizing.     Types of PTEF coating: The anodic coating to be impregnated or coated shall...read more
Feb 29 , 2020
Below specification defines E-mold acceptance criteria of cosmetic inspection.   Classification on product surfaces. Class 1 Surface: Visible "ofter" by user. Class 2 Surface: Visible occasionlly or likely to be seen by user. Class 3 Surface: Normally not visible or only visible during installation.   1. Acceptance...read more
Jul 05 , 2019
Anodizing is used to increase surface hardness, wear resistance and dielectric strength. Anodizing can also provide a good base for painting or colouring, creating an extremely stable but porous oxide layer on the surface of aluminum.     Type                        ...read more
May 23 , 2019
  Among the vast array of industrial metal finishing options are two comparable processes known as electrophoretic deposition (colloquially known as electrocoating or e-coating) and powder coating. These two processes are similar, as they both involve the application of a coating to a substrate for purposes such as enhancing corrosion protection,...read more
Displaying 1 to 4 (of 4 news)
Search

Contact us

E-mold rapid manufacturing Ltd !
Louisa Xiao

Email : louisa@e-moldrapid.com

Tel : (+86)1345 0999 345

twitter linkedin youtube


Quick Links:  Precision Mold | Plastic Mold China | Low Volume Manufacturing | Compression Silicone Molding | Sheet Metal Stamping